This operation is only valid on a volume mounted as a snapshot. The savepoint operation failed because files are open on the transaction. This is not permitted.
Windows has discovered corruption in a file, and that file has since been repaired. Data loss might have occurred. The call to create a transaction manager object failed because the Tm Identity stored in the logfile does not match the Tm Identity that was passed in as an argument.
There is no valid data. The transactional resource manager cannot currently accept transacted work due to a transient condition, such as low resources. The transactional resource manager had too many transactions outstanding that could not be aborted. The transactional resource manager has been shut down. The modem did not accept the command sent to it. Verify that the configured modem name matches the attached modem.
The modem did not respond to the command sent to it. Verify that the modem is properly cabled and turned on. Dial tone not detected within the required time. Verify that the phone cable is properly attached and functional. The requested operation cannot be completed because the terminal connection is currently busy processing a connect, disconnect, reset, or delete operation.
An attempt has been made to connect to a session whose video mode is not supported by the current client. The requested operation can be performed only on the system console. This is most often the result of a driver or system DLL requiring direct console access.
The requested session cannot be controlled remotely. This might be because the session is disconnected or does not currently have a user logged on. Your request to connect to this terminal server has been rejected. Your terminal server client license number is currently being used by another user. Call your system administrator to obtain a unique license number. Your terminal server client license number has not been entered for this copy of the terminal server client.
Contact your system administrator. The number of connections to this computer is limited and all connections are in use right now. Try connecting later or contact your system administrator.
Remote control could not be terminated because the specified session is not currently being remotely controlled. The remote control of the console was terminated because the display mode was changed. Changing the display mode in a remote control session is not supported.
Activation has already been reset the maximum number of times for this installation. Your activation timer will not be cleared. Only the current user or an administrator can log on to this computer. You do not have permission to log in at this time. The terminal server security layer detected an error in the protocol stream and has disconnected the client. The file replication service API terminated the request.
The event log might contain more information. The file replication service terminated the request. The file replication service cannot be contacted. The file replication service cannot satisfy the request because the user has insufficient privileges. The file replication service cannot satisfy the request because authenticated RPC is not available. The file replication service cannot satisfy the request because the user has insufficient privileges on the domain controller.
The file replication service cannot satisfy the request because authenticated RPC is not available on the domain controller. The file replication service cannot communicate with the file replication service on the domain controller. The file replication service on the domain controller cannot communicate with the file replication service on this computer.
The file replication service cannot populate the system volume because of an internal error. The file replication service cannot populate the system volume because of an internal time-out.
The file replication service cannot process the request. The system volume is busy with a previous request. The file replication service cannot stop replicating the system volume because of an internal error. An error occurred while installing the directory service. For more information, see the event log. The requested operation could not be performed because the directory service is not the master for that type of operation. The directory service was unable to initialize the subsystem that allocates relative identifiers.
The requested operation did not satisfy one or more constraints associated with the class of the object. The directory service cannot perform the requested operation on the relative distinguished name RDN attribute of an object. The root object must be the head of a naming context. The root object cannot have an instantiated parent. The add replica operation cannot be performed.
The naming context must be writable to create the replica. An attempt was made to add an object of a class that does not have an RDN defined in the schema. An attempt was made to modify an object to include an attribute that is not legal for its class. The operation could not be performed because the object's parent is either uninstantiated or deleted. The operation cannot be performed because child objects exist. This operation can only be performed on a leaf object.
The current FSMO holder could not be contacted. Schema update failed: Class in the subclass of the list does not exist or does not satisfy hierarchy rules. The tree deletion is not finished. The request must be made again to continue deleting the tree. No superior reference has been configured for the directory service. The directory service is, therefore, unable to issue referrals to objects outside this forest. The GC verification failed.
The GC is not available or does not support the operation. Some part of the directory is currently not available. This directory server is shutting down, and cannot take ownership of new floating single-master operation roles. The directory service is missing mandatory configuration information and is unable to determine the ownership of floating single-master operation roles.
The directory service was unable to transfer ownership of one or more floating single-master operation roles to other servers. The naming context is in the process of being removed or is not replicated from the specified server. A synchronization attempt failed because the destination DC is currently waiting to synchronize new partial attributes from the source. This condition is normal if a recent schema change modified the partial attribute set. The destination partial attribute set is not a subset of the source partial attribute set.
The replication synchronization attempt failed because a master replica attempted to sync from a partial replica. The server specified for this replication operation was contacted, but that server was unable to contact an additional server needed to complete the operation.
The version of the directory service schema of the source forest is not compatible with the version of the directory service on this computer. Name translation: Unable to perform purely syntactical mapping at the client without going out to the wire. The schema update operation tried to add a backward link attribute that has no corresponding forward link. The source and destination of a cross-domain move do not agree on the object's epoch number. Either the source or the destination does not have the latest version of the object.
The source and destination of a cross-domain move do not agree on the object's current name. The source and destination for the cross-domain move operation are identical. The caller should use a local move operation instead of a cross-domain move operation. The source and destination for a cross-domain move do not agree on the naming contexts in the forest. Either the source or the destination does not have the latest version of the Partitions container.
The destination of a cross-domain move is not authoritative for the destination naming context. The source and destination of a cross-domain move do not agree on the identity of the source object. Either the source or the destination does not have the latest version of the source object. The object being moved across domains is already known to be deleted by the destination server. The source server does not have the latest version of the source object.
A cross-domain move operation failed because two versions of the moved object exist—one each in the source and destination domains. The destination object needs to be removed to restore the system to a consistent state. This object cannot be moved across domain boundaries either because cross-domain moves for this class are not allowed, or the object has some special characteristics, for example, a trust account or a restricted relative identifier RID , that prevent its move.
Cannot move objects with memberships across domain boundaries because, once moved, this violates the membership conditions of the account group. Remove the object from any account group memberships and retry.
A naming context head must be the immediate child of another naming context head, not of an interior node. The directory cannot validate the proposed naming context name because it does not hold a replica of the naming context above the proposed naming context. Ensure that the domain naming master role is held by a server that is configured as a GC server, and that the server is up-to-date with its replication partners. Applies only to Windows operating system domain naming masters.
The operation cannot be performed because the server does not have an infrastructure container in the domain of interest. The search flags for the attribute are invalid. The directory service failed to lock a tree in preparation for a tree deletion because the tree was in use. The directory service failed to identify the list of objects to delete while attempting a tree deletion. Check the event log for detailed information. Adding a new mandatory attribute to an existing class, deleting a mandatory attribute from an existing class, or adding an optional attribute to the special class Top that is not a backlink attribute directly or through inheritance, for example, by adding or deleting an auxiliary class is not allowed.
An object of this class cannot be created under the schema container. You can only create Attribute-Schema and Class-Schema objects under the schema container. The replica or child install failed to get the objectVersion attribute on the schema container on the source DC. Either the attribute is missing on the schema container or the credentials supplied do not have permission to read it.
The schema cache load failed to convert the string default security descriptor SD on a class-schema object. Applies only to Windows servers. The syntax of the linked attribute being added is incorrect.
Forward links can only have syntax 2. Click OK to shut down the system and reboot into Safe Mode. The replication update could not be applied because either the source or the destination has not yet received information regarding a recent cross-domain move operation. The requested domain could not be deleted because there exist domain controllers that still host this domain. The checkpoint with the PDC could not be taken because too many modifications are currently being processed.
Your computer could not be joined to the domain. You have exceeded the maximum number of computer accounts you are allowed to create in this domain. Contact your system administrator to have this limit reset or increased.
Critical directory service system objects cannot be deleted during tree deletion operations. The tree deletion might have been partially performed. Click OK to shut down the system. You can use the Recovery Console to further diagnose the system. The version of the operating system installed is incompatible with the current forest functional level. You must upgrade to a new version of the operating system before this server can become a domain controller in this forest.
The version of the operating system installed is incompatible with the current domain functional level. You must upgrade to a new version of the operating system before this server can become a domain controller in this domain. The version of the operating system installed on this server no longer supports the current forest functional level.
You must raise the forest functional level before this server can become a domain controller in this forest. The version of the operating system installed on this server no longer supports the current domain functional level.
You must raise the domain functional level before this server can become a domain controller in this domain. The version of the operating system installed on this server is incompatible with the functional level of the domain or forest. The functional level of the domain or forest cannot be raised to the requested value because one or more domain controllers in the domain or forest are at a lower, incompatible functional level.
The forest functional level cannot be raised to the requested value because one or more domains are still in mixed-domain mode. All domains in the forest must be in native mode for you to raise the forest functional level.
A system flag has been set on the object that does not allow the object to be moved or renamed. This object is not allowed to change its grandparent container. Moves are not forbidden on this object, but are restricted to sibling containers. Could not access a partition of the directory service located on a remote server.
Make sure at least one server is running for the partition in question. The directory cannot validate the proposed naming context or partition name because it does not hold a replica, nor can it contact a replica of the naming context above the proposed naming context. Ensure that the parent naming context is properly registered in the DNS, and at least one replica of this naming context is reachable by the domain naming master.
The directory service cannot derive an SPN with which to mutually authenticate the target server because the corresponding server object in the local DS database has no serverReference attribute.
The directory service cannot perform the requested operation because the servers involved are of different replication epochs which is usually related to a domain rename that is in progress. The directory service binding must be renegotiated due to a change in the server extensions information. The remote create cross-reference operation failed on the domain naming master FSMO.
The operation's error is in the extended data. The directory service cannot derive an SPN with which to mutually authenticate the target server because the server's domain has been deleted from the forest.
Insufficient attributes were given to create an object. This object might not exist because it might have been deleted and the garbage already collected.
The FSMO role ownership could not be verified because its directory partition did not replicate successfully with at least one replication partner. The target container for a redirection of a well-known object container cannot already be a special container.
The directory service cannot perform the requested operation because a domain rename operation is in progress. The directory service detected a child partition below the requested partition name. The partition hierarchy must be created in a top down method. The directory service cannot replicate with this server because the time since the last replication with this server has exceeded the tombstone lifetime. The LDAP server's network send queue has filled up because the client is not processing the results of its requests fast enough.
No more requests will be processed until the client catches up. If the client does not catch up then it will be disconnected. The scheduled replication did not take place because the system was too busy to execute the request within the schedule window. The replication queue is overloaded. Consider reducing the number of partners or decreasing the scheduled replication frequency.
At this time, it cannot be determined if the branch replication policy is available on the hub domain controller. Retry at a later time to account for replication latencies. The subtree index bit is valid only on single-valued attributes. The tuple index bit is valid only on attributes of Unicode strings. The replication operation failed because the target object referenced by a link value is recycled. The record could not be created because this part of the DNS namespace has been delegated to another server.
This operation is not allowed while the DNS server is loading zones in the background. Try again later. The application directory partition operation failed.
The domain controller holding the domain naming master role is down or unable to service the request or is not running Windows Server The system detected an invalid pointer address in attempting to use a pointer argument in a call. A message sent on a datagram socket was larger than the internal message buffer or some other network limit, or the buffer used to receive a datagram into was smaller than the datagram itself.
A protocol was specified in the socket function call that does not support the semantics of the socket type requested. An unknown, invalid, or unsupported option or level was specified in a getsockopt or setsockopt call. The requested protocol has not been configured into the system, or no implementation for it exists. The protocol family has not been configured into the system or no implementation for it exists. The connection has been broken due to keep-alive activity detecting a failure while the operation was in progress.
An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full. A request to send or receive data was disallowed because the socket is not connected and when sending on a datagram socket using a sendto call no address was supplied. A request to send or receive data was disallowed because the socket had already been shut down in that direction with a previous shutdown call.
A connection attempt failed because the connected party did not properly respond after a period of time, or the established connection failed because the connected host failed to respond. A Windows Sockets implementation might have a limit on the number of applications that can use it simultaneously. WSAStartup cannot function at this time because the underlying system it uses to provide network services is currently unavailable. The call has been canceled. This is usually a temporary error during host name resolution and means that the local server did not receive a response from an authoritative server.
The main mode policy was successfully added, but some of the requested offers are not supported. The quick mode policy was successfully added, but some of the requested offers are not supported.
Starts the list of frequencies of various IKE Win32 error codes encountered during negotiations. The IKE failed to find a valid machine certificate.
Contact your network security administrator about installing a valid certificate in the appropriate certificate store. The IKE negotiation failed because the machine certificate used does not have a private key. IPsec certificates require a private key. Contact your network security administrator about a certificate that has a private key. Kerberos authentication will not function.
The most likely reason for this is lack of domain membership. This is normal if your computer is a member of a workgroup. The most common cause for this is that the driver does not have the correct filter.
Check your policy to verify the filters. The most common cause for this is if the IKE negotiation took too long to complete. If the problem persists, reduce the load on the faulting machine. The lifetime value received in the Responder Lifetime Notify is below the Windows configured minimum value. Fix the policy on the peer machine. Could not verify the binding between the color graphics adapter CGA address and the certificate.
The application has failed to start because its side-by-side configuration is incorrect. See the application event log for more detail. A component version required by the application conflicts with another active component version.
Lack of system resources has required isolated activation to be disabled for the current thread of execution. An attempt to set the process default activation context failed because the process default activation context was already set.
The manifest for an assembly used by the application has a reference to a dependent assembly that is not installed. The manifest has a default namespace specified on the assembly element but its value is not urn:schemas-microsoft-com:asm. Two or more components referenced directly or indirectly by the application manifest have files by the same name.
Two or more components referenced directly or indirectly by the application manifest have window classes with the same name. Two or more components referenced directly or indirectly by the application manifest have proxies for the same COM interface IIDs. Two or more components referenced directly or indirectly by the application manifest are different versions of the same component, which is not permitted.
A component's file does not match the verification information present in the component manifest. Manifest Parse Error: Parameter entities cannot be used inside markup declarations in an internal subset. Manifest Parse Error: The namespace prefix is not allowed to start with the reserved string xml".
Manifest Parse Error: The stand-alone attribute must have the value "yes" or "no". Assembly Protection Error: The catalog for an assembly is not valid, or does not match the assembly's manifest.
The supplied assembly identity is missing one or more attributes that must be present in this context. The supplied assembly identity has one or more attribute names that contain characters not permitted in XML names. The identity string is malformed. This might be due to a trailing comma, more than two unnamed attributes, a missing attribute name, or a missing attribute value. A string containing localized substitutable content was malformed. The event data raised by the publisher is not compatible with the event template definition in the publisher's manifest.
The caller is trying to subscribe to a direct channel which is not allowed. The events for a direct channel go directly to a log file and cannot be subscribed to. The query result is stale or invalid. This might be due to the log being cleared or rolling over after the query result was created.
Users should handle this code by releasing the query result object and reissuing the query. An expression can only be followed by a change-of-scope operation if it itself evaluates to a node set and is not already part of some other change-of-scope operation. Left side arguments to binary operators must be either attributes, nodes, or variables and right side arguments must be constants.
A step operation must involve either a node test or, in the case of a predicate, an algebraic expression against which to test each node in the node set identified by the preceding node set can be evaluated. Open Spotlight Diagnostic Server app and log into it. Click Connections icon and right-click on the Windows connection having this issue. Choose Properties option. Verify the user account used here. That account must be part of the local Administrator group of the monitored host.
If the account used for establishing the connection is the Diagnostic Server service owner, then open Windows Services console and check the account used for Spotlight Cloud Diagnostic Server services. Email Address. Leave a Comment. All rights reserved. Deployment Image Servicing and Management tool. The restorehealth option is not recognized in this context. For more information, refer to the help.
Let's try to run the Windows Media Player Settings troubleshooter, and see if it will detect any errors. To do so, kindly follow these steps:. In the search field on your taskbar, type Troubleshooting , then press Enter. Then that's it. I am offered to close the troublershooter or explore additional options, which brings me on to the help page Details required : characters remaining Cancel Submit 12 people found this reply helpful. We suggest that you perform a clean boot to check if software conflicts are causing the issue by starting Windows using a minimal set of drivers and startup programs.
Note: Please go through the section: How to reset the computer to start as usual after troubleshooting with clean boot of the Kb article to boot the computer in normal startup after fixing the issue. I have Windows 10 OS x A few days ago I began to get an error message after trying to launch any media file with Windows Media Player.
When I try to open a file mp3, mp4 etc. I disabled Media Feauters and reenabled it after restarting computer. Also I tried to some tricks which I saw other discussions in Microsoft forums but none of them helped. This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. I have the same question Report abuse.
Details required :. Cancel Submit. Hello Nurlan, Thank you for posting your concern in Microsoft community and welcome to the Windows 10 Family. To be able to assist you better, let us know a few more details on the below questions. Did you make any changes to the computer prior to the issue?
Did you check if similar issues occur when you log in to Windows using a different user account? Do you have a System Restore point prior to the issue? Did you check if the status of the Windows Media Player network sharing service in Windows Services is listed as started?
Next, try to re-register Windows Media Player components. Follow the below steps. How to perform a clean boot in Windows Note : As the article is designed for Windows 8. Method 2 This issue may happen due to system file corruption.
How satisfied are you with this reply?
0コメント